A+ A A-

Studies of Geopolymerization Route For Metakaolin Geopolymeric Materials

Geopolymer


Studies of Geopolymerization Route For Metakaolin Geopolymeric Materials

 

 Geopolymer

 


 Geopolymer
Geopolymer

 

 

 

 

 


 
Investigation on production of metakaolin geopolymeric powder was aimed to increase the productivity and application of geopolymer products. Geopolymerization process was applied in the manufacturing of metakaolin geopolymeric powder to be used in geopolymer synthesis. Geopolymer slurry was made by alkaline activation of metakaolin in alkali activator solution (a mixture of NaOH and sodium silicate solutions). The geopolymer slurry was heated in an oven to produce pre-cured paste and then pulverized to get uniform particle size geopolymeric powder. By adopting the concept of “just add water”, the metakaolin geopolymeric powder was mixed with water and then oven-cured to produce resulting geopolymer pastes. The results showed that the optimum conditions for producing highest strength resulting paste are by using 8M of NaOH solution, solids/liquid ratio of 0.80, an activator ratio of 0.20, pre-curing of 80°C for 4 hours, 22% of mixing water and curing regime of 60°C for 72 hours. The resulting geopolymer pastes have low bulk density and were potential for a lightweight material. Upon the mixing of water with geopolymeric powder, densification of the structure occurred with the formation of compact geopolymer gels. The geopolymeric powder and resulting pastes showed the combination of amorphous and crystalline phases as analyzed by XRD. After ageing, the intensities of zeolites crystalline phases increased and this emphasized the benefit of zeolites in strength development of resulting pastes. This study clearly demonstrates that the production of metakaolin geopolymeric powder was able to be used in manufacturing geopolymer pastes.

Keywords: Geopolymer, powder, activator solution, geopolymerization, water